Billiards tables are made for play and can normally look good for years before they start to show worn out spots or small rips on the felt which covers the slate playing surface. The more tables are used, the sooner this will happen, so it can be expected earlier in pool halls than those which are privately owned and used less regularly. Once damage occurs to the felt cover, those Denver, CO billiards fans who are dedicated to the game, should consider hiring an experienced professional who performs pool table refelting services.
When found early on, it can offer at least temporary improvement for one to repair his or her own table, however it must be done with care. A felt patch must be measured, placed, and glued properly in a manner that will not impair game play.
Generally it's a safer bet to opt for a total refelting of the playing surface. This can dramatically improve the look of the table, and will make game play more smooth and precise. An amateur patch-job may suffice for awhile, but ultimately may end up hindering the game.
There are numerous people who refelt pool tables for a living whom one can hire to do an excellent and professional job of this task. They may be listed in a local phone directory in the yellow pages, and can also be located by doing a Google search on the internet. It's best to call a few to compare prices, experience, and the like before deciding which one to hire.
A green felt cover is by no means mandatory, in fact many refelting pros will give their customers a selection of different colors to choose from for a more original appearance. A variety of solid colors besides traditional green are available, some even feature a pattern or image. This appeals to some people who would like a more unique look.
Most table repair technicians will complete all work in the customer's home, eliminating the added expense and trouble of moving the table to a workshop. The first step in the process is to measure the exact size required for the new felt cover. The rails will then be removed, the old staples pulled out, and the adhesive stripped from the surface, in preparation for applying the new layer of adhesive.
Once the slate surface is ready, a thin coat of glue will be spread evenly across it and the felt, in the customer's preferred color, will be laid carefully over top of it. The felt will be stretched in all directions to ensure that it lays flat against the slate top and that there are no bumps or creases in it. Staples will be applied to hold it in place.
If the rails need recovering as well, they will be disassembled and this will be done before they are put back on. The new covering will be left to stand for a day with weights on top of it, and after this time has passed, it will be okay for people to play on it once again.
When found early on, it can offer at least temporary improvement for one to repair his or her own table, however it must be done with care. A felt patch must be measured, placed, and glued properly in a manner that will not impair game play.
Generally it's a safer bet to opt for a total refelting of the playing surface. This can dramatically improve the look of the table, and will make game play more smooth and precise. An amateur patch-job may suffice for awhile, but ultimately may end up hindering the game.
There are numerous people who refelt pool tables for a living whom one can hire to do an excellent and professional job of this task. They may be listed in a local phone directory in the yellow pages, and can also be located by doing a Google search on the internet. It's best to call a few to compare prices, experience, and the like before deciding which one to hire.
A green felt cover is by no means mandatory, in fact many refelting pros will give their customers a selection of different colors to choose from for a more original appearance. A variety of solid colors besides traditional green are available, some even feature a pattern or image. This appeals to some people who would like a more unique look.
Most table repair technicians will complete all work in the customer's home, eliminating the added expense and trouble of moving the table to a workshop. The first step in the process is to measure the exact size required for the new felt cover. The rails will then be removed, the old staples pulled out, and the adhesive stripped from the surface, in preparation for applying the new layer of adhesive.
Once the slate surface is ready, a thin coat of glue will be spread evenly across it and the felt, in the customer's preferred color, will be laid carefully over top of it. The felt will be stretched in all directions to ensure that it lays flat against the slate top and that there are no bumps or creases in it. Staples will be applied to hold it in place.
If the rails need recovering as well, they will be disassembled and this will be done before they are put back on. The new covering will be left to stand for a day with weights on top of it, and after this time has passed, it will be okay for people to play on it once again.
About the Author:
When you need information about pool table refelting, pay a visit to the web pages online here. You can see details at http://www.americanbilliardsservice.com now.
