Custom made high arch soles are usually made for the the people who have severe cases of low foot arches or complete flat feet. Of course the custom made ones are made from the manufacturers have the specific measurements and such that the flat footed patient will need but what many do not know is that it is possible to create handmade orthotics. The only catch here is that only athletes or people with a mild case of low arch may be able to use it just to be safe.
Now if one would want to make a homemade arch support insole, then he would have to buy a few things. Firstly, he will be needing two to three old insoles that would probably come from an old pair of shoes. He has to make sure that the insoles all have the same size.
Once these soles have already been gotten, then the very next thing to do would be to get some glue. One is recommended to use super glue for this kind of project because super glue is very efficient and dries fast. However, if one does not have super glue in his house, then he may use some other sticky glue that is waterproof.
Now the first thing to do would be to get the existing insoles and measure them. As stated earlier, all of the insoles have to be of the same size so that there will be consistency. After that, put one insole on top of another and determine which part is the part that would hold the arch.
Once that part has already been found, then the next thing to do would be to cut out that part using the pair of scissors that was acquired earlier. After that, one has to now make sure that the cut part will match the insole, if not, then maybe a bit more cutting will have to be done. Once that has already been done, then one can now glue the cut part to the insole.
Now when that is already done, then all that is left to do is wait for the glue to dry. If the glue takes a bit long to dry, then he may put the sole in front of an electric fan so that it will dry faster. However, if one uses super glue, then the glue will be able to dry in just a few minutes.
Now if one notices that the arch support is not high enough, then he may actually add another layer if he would want to. All he has to do is get another insole and just repeat the process that was done a while ago. After that, he just has to wait for the glue to dry again and try it on.
So as one can see, it is actually very easy to make handmade orthotics at home. However, if one has a really bad condition of flat feet, then it is better that he would just buy a custom made one. However, if he just has a low arch or is an athlete that needs one that will help him in his sports, then a handmade one will already suffice.
Now if one would want to make a homemade arch support insole, then he would have to buy a few things. Firstly, he will be needing two to three old insoles that would probably come from an old pair of shoes. He has to make sure that the insoles all have the same size.
Once these soles have already been gotten, then the very next thing to do would be to get some glue. One is recommended to use super glue for this kind of project because super glue is very efficient and dries fast. However, if one does not have super glue in his house, then he may use some other sticky glue that is waterproof.
Now the first thing to do would be to get the existing insoles and measure them. As stated earlier, all of the insoles have to be of the same size so that there will be consistency. After that, put one insole on top of another and determine which part is the part that would hold the arch.
Once that part has already been found, then the next thing to do would be to cut out that part using the pair of scissors that was acquired earlier. After that, one has to now make sure that the cut part will match the insole, if not, then maybe a bit more cutting will have to be done. Once that has already been done, then one can now glue the cut part to the insole.
Now when that is already done, then all that is left to do is wait for the glue to dry. If the glue takes a bit long to dry, then he may put the sole in front of an electric fan so that it will dry faster. However, if one uses super glue, then the glue will be able to dry in just a few minutes.
Now if one notices that the arch support is not high enough, then he may actually add another layer if he would want to. All he has to do is get another insole and just repeat the process that was done a while ago. After that, he just has to wait for the glue to dry again and try it on.
So as one can see, it is actually very easy to make handmade orthotics at home. However, if one has a really bad condition of flat feet, then it is better that he would just buy a custom made one. However, if he just has a low arch or is an athlete that needs one that will help him in his sports, then a handmade one will already suffice.
About the Author:
For a summary of the advantages of handmade orthotics don't hesitate to check out our website today. To reach our homepage now, just click on this link http://www.customorthoticfootbeds.com.
